Member Center

More

CE for Building

More

Standard for CE

More

Other Standard

More

Contact Us

Address: 16F Deying Mansion, No.118 Middle JiangdongRoad, Nanjing, China
TeL:(+86) 025-8658 3475
Fax:(+86) 025-8658 3457
E-mail:info@hksmartps.com
Website:http://www.hksmartps.cn
Your location: > Standard > British >

BS 476-7 Classification of spread of flame

BS476-7/BS 476-7/BS476/Classification of spread of flame

 

BS 476-7: Fire tests on building materials and structures-Part 7 method of test to determine the classification of the surface spread of flame of products.

 

BS 476-7:1997 test method

The specimen is mounted in a water-cooled holder and is exposed to a radiant panel over a ten minute test duration. In addition, a pilot flame is applied to the bottom corner of the specimen during the first minute of test. The time required for the flame front to reach reference marks on the specimen is noted, together with the extent of flame spread at one minute thirty seconds test duration and at the end of the test. Observations are also made of the burning behaviour.

 

Materials are classified according to test performance as shown in the table below. Class 1 is the best classification that can be achieved during this test alone and Class 4 is the worst classification that can be achieved on this test. Class 4 materials are considered high risk.

 

Evaluate BS 476-7:1997 classification of spread of flame

 

 

Classification of spread of flame

Classification

Spread of flame at 1.5 min

Final spread of flame (10 min)

 

Limit  (mm)

Limit for one specimen in sample   (mm)

Limit  (mm)

Limit for one specimen in sample  (mm)

Class 1

165

165+25

165

165+25

Class 2

215

215+25

455

455+45

Class 3

265

265+25

710

710+75

Class 4

Exceeding the limits for class 3

 

BS 476 reference standard

 

BS 476:Fire tests on building materials and structures.

 

BS 476-3:2004 external fire exposure roof test

 

BS 476-4:1970 Non-combustibility test for materials

 

BS 476-5:1979 Method of test of ignitability

 

BS476-6:1989 Method of test for propagation for materials

 

BS 476-7:1997 Surface spread of flame test for material

 

BS 476-11:1982 Method for assessing the heat emission from building materials

 

BS 476-12:1991 Ignitability of products by direct flame impingement

 

BS 476-15:1992 Method for measuring heat release of products-cone calorimeter

 

BS 476-20:1987 Method for determination of the fire resistance of elements of construction (general principles)

 

BS 476-21:1987 Methods for determination of the fire resistance of loadbearing elements of construction

 

BS 476-22:1987 Methods for determination of the fire resistance of non-loadbearing elements of construction

 

Application BS 476-7 Fire testing materials

Rubber product、rubber seal

Ceiling covering

Walling covering

Textile、curtain、adumbral product、Non-woven fabrics

Seat shell、seat trim

Flooring covering

Foam material、sponge、melamine foam

Paint、adhesives、pigment、varnish

FRP、FPP composite materials、SMC sheet

Adhesives、glue

Window、door and framework

Small parts

Connector、connected equipment

Pipe、cooling pipe、heat pipe

Other materials

 

Tel:+86400-603-6575

Home | About Smart | CE Certification | CE Knowledge | Standard | Join Us | Standard Download | News | Consultation | Blog | Contact Us
Address:1622/16F Deying Mansion, No.118 Middle JiangdongRoad,Nanjing,Jiangsu,China Tel:(+86)025-86583475 Fax (+86)025-86583457 E-mail:info@hksmartps.com
Copyright (C)2011 www.hksmartps.cn Smart Products Service Co.,LTD-All rights reserved