Member Center
More
CE for Building
More
Standard for CE
More
Other Standard
More
Contact Us
Address: 16F Deying Mansion, No.118 Middle JiangdongRoad, Nanjing, China
TeL:(+86) 025-8658 3475
Fax:(+86) 025-8658 3457
E-mail:info@hksmartps.com
Website:http://www.hksmartps.cn
TeL:(+86) 025-8658 3475
Fax:(+86) 025-8658 3457
E-mail:info@hksmartps.com
Website:http://www.hksmartps.cn
Your location: > Standard >
EN ISO 5658-2 Reaction to fire tests-spread of flame-Part 2: Lateral spread on building products in vertical configuration Test method Lateral flame spread is determined on vertica
EN ISO 9239-1:2010 revised EN ISO 9239-1: 2002 floor-covering Reaction to fire tests ISO EN 9239-1: Reaction to fire tests-Horizontal surface spread of flame on floor-covering syst
ISO 5660-1 Reaction to fire tests-Heat release, smoke production and mass loss rate-Part 1: Heat release rate (cone calorimeter method) The test method is similar with GB/T 16172:2
2011-06-10 ISO EN 1182 Non-combustibility test
ISO EN 1182:2002 Non-combustibility test method of building materials The standard is similar with GB/T 5464:1999 1. Scope This method of test for determining the non-combustibilit
2011-06-10 BSS 7239: Toxicity
BSS 7239 : Toxic gas sampling and analytical procedures. Gases produced for analysis are generated in specified, calibrated smoke chamber during standard rate of smoke generation t
2011-06-10 ASTM E 662: Smoke density test
ASTM E 662:2009 Standard test method for specific optical density of smoke generated by solid materials Smoke density (Ds) testing conducted in accordance with ASTM E 662 . Sample
ASTM E 648 : Standard test method for critical radiant flux of floor-covering systems using a radiant heat energy source. ASTM E 648 test method The Floor Radiant Panel apparatus i
ASTM E 162 : Standard test method for surface flammability of materials using a radiant heat energy source. According to ASTM E 162 standard using a radiant heat source for surface
2011-06-10 ASTM E 84 test method for surface burning
ASTM E 84-06 : standard test method for surface burning characteristics of building materials Flame spread is the development of the flame in the surface, it is related to a fire n
DIN 54837:2007 Testing of materials, small components and component sections for rail vehicles-Determination of burning behaviour using a gas burner. DIN54837 the test method is us
Home | About Smart | CE Certification | CE Knowledge | Standard | Join Us | Standard Download | News | Consultation | Blog | Contact Us
Address:1622/16F Deying Mansion, No.118 Middle JiangdongRoad,Nanjing,Jiangsu,China Tel:(+86)025-86583475 Fax (+86)025-86583457 E-mail:info@hksmartps.com
Copyright (C)2011 www.hksmartps.cn Smart Products Service Co.,LTD-All rights reserved
Address:1622/16F Deying Mansion, No.118 Middle JiangdongRoad,Nanjing,Jiangsu,China Tel:(+86)025-86583475 Fax (+86)025-86583457 E-mail:info@hksmartps.com
Copyright (C)2011 www.hksmartps.cn Smart Products Service Co.,LTD-All rights reserved